855773644-LEED-v5-BD-C-Reference-Guide-Launch-Edition - Page 455
Extracted Content
site reuse, and salvage. Examples of waste tracking software include Green Halo, Waste Management’s Diversion and Recycling Tracking Tool (DART), SmartWaste, and Enviance.
DIVERSION RATE
Project teams are required to calculate total waste generated and diverted to determine the C&D waste diversion rate. Contractors are recommended to keep all tickets/paperwork in a safe location (if not online) and track the diversion rate periodically (e.g., monthly or bimonthly) so that adjustments can be made to meet diversion goals. Teams must ensure that calculations for all materials are done by weight. Many waste management facilities use scales to weigh loads of materials as they enter and exit the site. However, not all facilities have scales available. In such cases, a volume-based calculation is used instead. When a facility does not have scales, use a volume-to-weight conversion factor if volume is provided. If local conversion rates are not available, projects may use national averages, such as those found in Table 2.
Table 2. Default volume to weight conversion factors for common C&D waste
| Construction and Demolition (C&D) materials | Col2 |
|---|---|
| Asphalt paving (with or without rebar) | 1 cubic yard = 773 lbs |
| Concrete (with or without rebar) | 1 cubic yard = 860 lbs |
| Gypsum Board | 1 cubic yard = 467 lbs |
| Wood | 1 cubic yard = 169-268 lbs |
| Metal | 1 cubic yard = 143-225 lbs |
| Roofing | 1 cubic yard = 731-860 lbs. |
| Mixed C&D (Bulk) | 1 cubic yard = 484 lbs |
| Aggregate (rock) | 1 cubic yard = 999 lbs |
| Cardboard (flat) | 1 cubic yard = 106 lbs |
| Cardboard (baled) | 1 cubic yard = 700-1100 lbs |
SOURCE: U.S. Environmental Protection Agency Volume-to-Weight Conversion Factors, April 2016
Excluding ADC All materials that are recycled, salvaged, reused, or donated are included in the project’s diversion rate. However, projects must exclude certain materials from the diversion total while still accounting for them in the total C&D waste calculations. Specifically, alternative daily cover cannot be counted as diverted waste because it’s a disposal method rather than a true form of recycling, as the material is used for landfill operations rather than being repurposed into new products. To obtain ADC values from a mixed recycling or certified facility, request detailed documentation of material processing and their average ADC rates per month. If they do not have the ADC rates monthly, then quarterly, semi-annual, or annual rates are acceptable.
Hazardous waste, land-clearing debris, soil, and landscaping materials must be excluded from diversion totals. Soil is excluded because clean soil is rarely landfilled due to its high cost and
U.S. Green Building Council LEED v5 Reference Guide for Building Design and Construction, April 2025 Launch Edition 445