ASHRAE-90.1-2022- - Page 174
Extracted Content
10. OTHER EQUIPMENT
10.1 General 10.1.1 Scope. This section applies to other equipment as described in Section 10.4. 10.1.2 New Building or Site System or Equipment. Other equipment installed in new buildings shall comply with the requirements of Section 10.2.
10.1.3 Additions to Existing Systems and Equipment. Other equipment installed in additions to exist- ing buildings and existing sites shall comply with the requirements of Section 10.2.
10.1.4 Alterations to Existing Service Equipment or Systems 10.1.4.1 Alterations to other building service equipment shall comply with the requirements of Section 10.2 as applicable to those specific portions of the building that are being altered. 10.1.4.2 Alterations to systems shall comply with the requirements of Section 10.2, as applicable to those specific portions that are being altered.
10.1.4.3 Any new equipment subject to the requirements of Section 10 that is installed in conjunction with the alterations as a direct replacement of existing equipment or control devices shall comply with the specific requirements applicable to that equipment or control devices .
Exception to 10.1.4.3: Compliance shall not be required for the relocation or reuse of existing equip-
ment .
10.1.5 Climate. Climate zones shall be determined in accordance with Section 5.1.5 .
10.2 Compliance Paths. Other equipment shall comply with Sections 10.2.1 and 10.2.2. 10.2.1 Requirements for All Compliance Paths. Other equipment shall comply with Sections 10.1, “General”; 10.4, “Mandatory Provisions”; 10.5, “Prescriptive Path”, and 10.8, “Product Information.”
10.2.2 Additional Requirements to Comply with Section 10 (Not Used)
10.3 Simplified Building Compliance Path (Not Used)
10.4 Mandatory Provisions 10.4.1 Electric Motors. Electric motors manufactured alone or as a component of another piece of equip- ment with a rated motor power of 1 hp or more, and less than or equal to 200 hp, shall comply with the requirements shown in Table 10.8-1 for NEMA Design A motors, NEMA Design B motors, and IEC Design N motors, and Table 10.8-2 for NEMA Design C motors and IEC Design H motors .
172 ANSI/ASHRAE/IES Standard 90.1-2022 (I-P)