ASHRAE-90.1-2022- - Page 396

Extracted Content

Table M-1 Addenda to ANSI/ASHRAE/IES Standard 90.1-2019 (Continued)

AddendumSectionsDescription of ChangesaASHRAE
Standard
Committee
Approval
Cosponsor
Approval
(IES)
ASHRAE
BOD/Tech
Council
Approval
ANSI
Approval
h4.2.1.1Clarifies that the gross floor area should be used when calculating the area-weighted building performance factor (BPF.)10/30/202010/6/2020N/A10/30/2020
iG3.1.2.10Reinstates exception to Appendix G exhaust air energy recovery requirements for laboratory HVAC systems.10/30/202010/6/2020N/A10/30/2020
k12.5.2Adjusts Section 12 budget building fan requirements to avoid creating a fan power credit for energy recovery.10/30/202010/6/2020N/A10/30/2020
lG3.1Revises Appendix G language describing how to calculate and assign vertical fenestration in the baseline design.10/30/202010/6/2020N/A10/30/2020
m6.4.3.4.1Clarifies requirements for motorized dampers on vents for elevator shafts and stairwells; adds exception to allow
nonmotorized dampers in mild climates and low-rise buildings.
10/30/202010/6/2020N/A10/30/2020
n6.5.2.6Adds an exception to Section 6.5.2.6 allowing units to heat the ventilation airstream above 60°Fif exclusively using
series energy recovery.
10/30/202010/6/2020N/A10/30/2020
o9.4.1.1Reduces the minimum connected load that triggers daylighting responsive control requirements for sidelighting and
toplighting.
7/30/20216/9/2021N/A7/30/2021
p9.1.2, 9.1.4Modifies portions of Section 9 pertaining to alterations to ensure that such projects meet all applicable lighting
requirements.
2/26/20212/18/2021N/A2/26/2021
qTable G3.7Corrects Table G3.7 to maintain equivalent space type requirements per the established 2004 baseline.2/26/20212/18/2021N/A2/26/2021
r6.4.3.3.3Clarifies that residential spaces are not required to have optimal start controls.2/26/20212/18/2021N/A2/26/2021
s3.2, 5.5.3.1.1, 5.5.3.2,
5.5.4.5, Table 12.5.1, C3.6,
Table G3.1
Replaces the term_solar reflectance index (SRI)_ with_solar reflectance_ (for walls only) and establishes a minimum solar
reflectance requirement for east-, south-, and west-oriented walls in Climate Zone 0.
2/26/20212/18/2021N/A2/26/2021
t3.2, 4.2.5, 5.1.3, 5.4.3,
5.7.2, 5.7.3.1, 5.8, 5.9.1.2,
6.4.4.2.1, 6.4.5, 6.5.1,
Table 12.5.1 (5), 12.5.3,
13, C1.5, C3.5.5.3, C3.6,
C3.1.1.4, Table G3.1 (5),
Table H-3
Adds requirement to perform whole-building air leakage testing and measurement on buildings less than 25,000 ft2,
specifies performance requirements for compliance, references the applicable ASTM standard, and modifies relevant
Section 3 terminology.
6/25/20226/17/20226/29/20227/29/2022
u12.5.2Specifies the use of air economizers for budget building systems and clarifies method for determining prescriptive
HVAC requirements based on the budget system type and capacity.
7/30/20216/9/2021N/A7/30/2021
v12.7.2, G1.3.2Clarifies the documentation that must be submitted to the rating authority or jurisdiction by projects following Section
12 and Appendix G, including simulation files upon request.
7/30/20216/9/2021N/A7/30/2021
wG3.1.3.7Indicates that chillers (type and number) shall be modeled in the baseline building design based on the total peak
coincident cooling load of the baseline HVAC system using chilled water.
2/26/20212/18/2021N/A2/26/2021
x6.4.1.2, Table 6.8.1-3Updates the cooling efficiency adjustment for centrifugal chillers and the requirements for chillers utilizing freeze-
protection. Replaces “fluid” and “water” with “liquid” throughout.
12/9/202112/8/2021N/A12/9/2021
yTable 6.8.1-16Modifies the minimum efficiency requirements for air-source heat pumps, updates the related AHRI rating standards,
introduces a new metric (COPHR) for units that perform heat recovery during chiller operation.
12/9/202112/8/2021N/A12/9/2021
a. These descriptions may not be complete and are provided for information only.a. These descriptions may not be complete and are provided for information only.a. These descriptions may not be complete and are provided for information only.a. These descriptions may not be complete and are provided for information only.a. These descriptions may not be complete and are provided for information only.a. These descriptions may not be complete and are provided for information only.a. These descriptions may not be complete and are provided for information only.