ASHRAE-90.1-2022- - Page 398

Extracted Content

Table M-1 Addenda to ANSI/ASHRAE/IES Standard 90.1-2019 (Continued)

AddendumSectionsDescription of ChangesaASHRAE
Standard
Committee
Approval
Cosponsor
Approval
(IES)
ASHRAE
BOD/Tech
Council
Approval
ANSI
Approval
at3.2, 4, 5, 6, 7, 8, 10Establishes a consistent numbering system for each section of the standard and revises the definition for alteration.1/27/20221/18/2022N/A1/27/2022
au6.2, 6.3.2Requires that heating and cooling equipment under the simplified compliance approach meet the requirements of
Section 6.4.1.5.
1/21/20221/18/2022N/A1/21/2022
av3.2, 3.3, 5.5.3.2, 5.5.5,
5.6.1.1, 5.7.2, 5.8.2.3,
Table 12.5.1 (5), 13, A1,
A10, C1.2.7, C2.9,
C3.5.5.4, C3.6, Appendix
E, Table G3.1 (5),
Appendix J
Adds requirements to address the impacts of thermal bridges in the building envelope.6/25/20226/17/20226/29/20227/29/2022
aw3.2, 3.3, 6.4.1.1, Table
6.8.1-21, Table F-6, 13
Adds the minimum energy efficiency requirements (and new CFEI metric) for large-diameter ceiling fans from
10 CFR 430.
1/21/20221/18/2022N/A1/21/2022
ayModifies Tables 6.8.1-8 and 6.8.1-9 for variable refrigerant flow (VRF) equipment based on the new AHRI 1230-2021
test procedure which required an adjustment to EER and IEER values.
7/20/20229/8/20228/15/20229/9/2022
az3.2, 10.4.6Introduces compressed air system requirements with measures for reducing common sources of energy waste.1/21/20221/18/2022N/A1/21/2022
bb9.5.1Updates the lighting power density values for the Building Area Method compliance path based on manufacturer-
reported improvements in lighting performance.
7/29/20227/26/2022N/A7/29/2022
bd12.5.2, Table 12.5.1,
G3.1.2, Table G3.1, Table
G3.5.3, Appendix L
Provides performance curves for modeling chillers in budget (Section 12) and baseline designs (Appendix G) as well as
default performance curves that can be used for chillers in proposed designs.
5/31/20225/19/2022N/A5/31/2022
be12.4.1.4, 12, C3.1.4,
G2.2.4
Updates references to the latest ANSI/ASHRAE Standard 140-2020 and specifies which simulation program tests are
required for compliance with Appendix C and G of Standard 90.1.
1/21/20221/18/2022N/A1/21/2022
bf9.5.2.2Updates the decorative and retail lighting power allowances, adds an additional allowance for videoconferencing, and
moves the additional power allowances and required controls to a table for easy reference.
5/31/20225/19/2022N/A5/31/2022
bg3.2, 8.1, 8.7.3.2, 9.1.1,
9.4.1, 9.6.3, 10.1.1, Table
12.5.1 (12), G1.2.2,
Table G3.1
Updates Sections 8, 9, 10, 12 and Appendix G to reflect the new purpose and scope (Addendum cb), utilizing the new
definition of site.
6/25/20226/17/20226/29/20227/29/2022
bhTable 12.5.1Revises the default PV system in the budget building design so that the temperature coefficient of power is aligned with
the PV Watts input for a 19% panel efficiency as required by Addendum ck.
1/21/20221/18/2022N/A1/21/2022
bi3.2, 5.1.3, 5.5.3.1Creates specific provisions to distinguish roof replacements from other types of alterations.7/29/20227/26/2022N/A7/29/2022
bj5.5.3, A1, A9, Appendix EReformats and clarifies Normative Appendix A requirements for thermal performance calculations to demonstrate
compliance with Section 5.5
6/25/20226/17/20226/29/20227/29/2022
a. These descriptions may not be complete and are provided for information only.a. These descriptions may not be complete and are provided for information only.a. These descriptions may not be complete and are provided for information only.a. These descriptions may not be complete and are provided for information only.a. These descriptions may not be complete and are provided for information only.a. These descriptions may not be complete and are provided for information only.a. These descriptions may not be complete and are provided for information only.